Weihai self-controlled reactor mixing technology

Blender name

Function introduction

Structural classification

Picture structure

Push type

Typical axial flow paddle, suitable for mixing, heat transfer, circulation, solid suspension, dissolution, etc. of low viscosity fluid; Features: low shear, strong cycle, high speed operation, low energy consumption; stirring speed 200~1500r/min.

It is divided into a top-turning and a down-turning structure, and it needs to be stable if it is running at high speed.

Turn on the turbine

Axial flow paddle, suitable for mixing, circulation, solid suspension, dissolution, etc. of low viscosity fluid; Features: medium shear and circulation, medium speed operation, suitable for small and medium-sized equipment; stirring speed 200~750 r/min.

It is divided into three blades, four blades, six blades, divided into leaves, curved leaves, and straight leaves.

Disc turbine

Typical runoff shear paddle, suitable for mixing, extraction, emulsification, solid suspension, dissolution, bubble dispersion, absorption, etc. of medium and low viscosity fluids; Features: strong shear, medium speed operation, high energy consumption. The stirring speed is 100~600 r/min.

Straight leaves, folded leaves, curved leaves, oblique leaves, concave leaves.

Frame type, anchor type

It is suitable for mixing, heat transfer and reaction of high viscosity fluids. Features: low shear, strong cycle capability, ultra low speed operation, high energy consumption; stirring speed 60~120 r/min.

It is divided into an elliptical bottom, a 90 degree cone bottom, a 120 degree cone bottom, an anchor type, and a special anchor structure for the glass.

Spiral belt

It is suitable for the mixing and heat transfer reaction of high viscosity and high solid content materials. Features: low shear, strong cycle capacity, ultra low speed operation, high energy consumption; stirring speed 60~80 r/min.

Double ribbon type, ribbon screw type

Three-leaf swept

Runoff paddle, suitable for mixing, heat transfer, circulation, crystallization, solid solution, etc. of medium and low viscosity fluids; Features: uniform shear force distribution, circulation flow under the cooperation of baffles, bottom mountable, medium and low speed operation; stirring The speed is 200~500 r/min.

Self-priming

Suitable for self-priming and redispersion of gases, can be used for catalytic gasification, oxidation, deep aeration and other gas-liquid mass transfer; self-priming ability, can double the gas-liquid reaction rate, low shear, high-speed operation, medium energy consumption The stirring speed is 600~1500 r/min.