Why does the bed thickness of the pig bed need 50 cm?
At present, pig breeding on a fermented bed is no longer a new topic. Pig-raising with a fermentation bed also brings convenience and benefits to the user. The shed can no longer smell odors, and does not need to remove manure and flush water. It can also save water, save electricity, save feed, and save drug costs. In particular, the operation of the golden bee in the submerged fermentation bed pigs is more convenient, the litter does not have to be fermented in advance, and no water is added. Only one dose of one material is needed to spread the material into the pig, which is very popular with users.
However, the thickness of the bedding of the fermentation bed is very particular. If the thickness of the bedding is not very good, it will directly affect the operation status of the fermentation bed and cause the failure of the fermentation bed. In wet-type fermentation beds for raising pigs, the thickness of litter usually needs to be 90 cm to 1 m thick, and the thickness of litter for dry-sweeping fermented pigs needs 50 cm (only 40 cm for chickens and ducks). There are also individual manufacturers in order to attract users, the declaration padding thickness only 20 to 30 cm, perhaps the user will think that 50 cm can, that 20 to 30 cm should also be possible, this idea is absolutely impossible. The bed of fermented bed is too thin, which is effective in the early stage of fermentation, but it will not be able to be used for a long time. It can not only accumulate heat, but also can not form a good gradient of absorption humidity, absorption, overload, overload carrying pig excrement, In the case of oversaturation, the spoilage microorganisms begin to work, the temperature drops and the spoilage becomes stinky, and decomposition of the feces cannot be achieved. Coupled with the arch itself pigs eating habits, did not ferment thick bed with a few arch opened, completely lost the sense of fermentation fermentation bed. This not only did not save costs, but also increased the cost of breeding in the absence of line, and in the end did not achieve the purpose of zero emissions.
It is scientifically grounded that the thickness of the bedding needs to be 50 centimeters, because the decomposing of the feces in the fermentation bed mainly depends on not the separate fermentation strains, mainly relying on the process of the strains decomposing the feces. The temperature generated. 95% of the composition of the feces is water, only 5% are solid materials. The strains produce a lot of temperature by decomposing the feces. The 50-centimeter bedding material and the core layer of fermentation (20-30 cm below the fermentation bed surface) can accumulate 45-. At a temperature of 55°C, this temperature can evaporate the water in the faeces. The solid material is mixed with the padding to form organic fertilizers and bacterial proteins to complete the decomposition of the excreta and achieve zero emissions without odor. In other words, the thickness of litter can only be higher than 50 centimeters, not less than 50 centimeters, 20-30 centimeters is not feasible. Therefore, it is recommended that when choosing fermentation bed products, do not be fooled by the immediate interests of the eyes, be sure to choose a hard brand, high reputation brand, so as to ensure longer-term benefits.Commercial Pizza Oven,Pizza Oven,Electric Pizza Oven,Conveyor Pizza Oven
Guangzhou New Power Catering Equipment Manufacturing Co.,Ltd , https://www.gznewpower.com