The best choice for fermentation bed homes

First, the bed of the fermentation bed is set.

1, the fermentation bed is set on the side of the external wall, generally a captive pig, approximately 8 to 20, so the fermentation bed area is generally 20 to 40 square meters.

2, fermentation mattress material thickness. The pig is at least 50 cm and 50 cm is the minimum requirement. The thickness also depends on the local climate and the farming density. Humid climate and slightly higher density may require thicker beds.

3, build a pool or dig pits, ground or underground?

Because there are many kinds of beneficial bacteria in the fermentation bed for a series of life activities such as survival, life, and mass reproduction, these life activities must have certain conditions. The aerobic bacteria grow in about 65% of the humidity conditions except that they need a lot of oxygen. Breeding is the most suitable.

If the surface water level is high, surface water will permeate into the fermentation bed if the underground fermentation bed is built. When the humidity of the fermentation bed material is higher than 75% or even higher, the metabolism of the beneficial bacteria on the fermentation bed will be affected by the sister and even A large number of deaths have failed to ferment pigs.

It is difficult to artificially control the humidity caused by the surface water. Therefore, it is not advisable to build a submerged fermentation bed in a place where the surface water level is relatively high in the south. In order to use a ground type fermentation bed, the success rate is high, the bed surface is high dry, and the humidity of the bacteria bed is easily regulated and the ventilation is good. Eating trough and eating table

Second, the fermentation bed intake related settings.

The foraging platform should be set up on the side of the corridor for feeding. When foraging, the forelimbs like to step on the ground. Therefore, a half meter or so of an eating platform should be built. The feeding platform is flat or partially buried under the fermentation bed on the fermentation bed. The padding thickness is less than 10 cm.

Third, drinking water related settings.

Drinking fountains can be located on the inside of the housing, but the water receivers and drains need to be installed and returned to the outside rainwater piping system. To avoid too much pigs drinking water flowing into the fermentation bed, resulting in dull mats, affecting the fermentation effect.

Micro Laser Distance Sensor

New product of U85 micro laser distance sensors use highly focused class 2 laser to detect objects or measure distances, and can return a measured value via varieties intface( serial, usb, rs232, rs485, bluetooth etc.). The electronic distance sensor is a very small Laser Distance Sensor, but high resolution up to 1mm and long distance measuring sensor - teachable measuring range of up to 30m. Extremely accurate distance sensing sensors, errors down to ± 1mm. And the mini sensors and measurements support continuous measurement function, great for compact solutions(eg: robots) with the smallest Laser Distance Sensor of the world!

Parameters of U85:

Mini Laser Distance Sensor,Optical Laser Distance Sensor,Smallest Laser Range Sonsor,Laser Measuring Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.accuracysensor.com