Industrial laundry:
The washing machine's workflow consists of four processes: water ingress, laundry, drainage, and dehydration. In a semi-automatic washing machine, these four processes are controlled by respective button switches. In the fully automatic washing machine, these four processes can be fully automated and run until the end of the laundry. Industrial washing machine features.
The structure of the industrial washing machine adopts the horizontal drum type. The inner and outer cylinders of the industrial washing machine are made of high-quality stainless steel, which is smooth and bright, corrosion-resistant, and has little wear and damage to the fabric, and the machine has a long service life;
The industrial washing machine inner cylinder door cover is equipped with a stainless steel safety locking mechanism, and the outer cylinder door cover is provided with a travel switch, which is safe and reliable in operation. The industrial washing machine adopts triangular tape transmission, which has small vibration, stable operation and durability.
Industrial washing machines are suitable for washing cotton, wool, chemical fiber, silk and Other clothing fabrics. Stonewashing machines can be used in clothing factories to wash denim and silk and other clothing.
Uses: Industrial washing machines are suitable for hotels, hotels, hospitals, schools, garment factories, washing plants, industrial and mining enterprises, etc., to meet the large-capacity laundry requirements.
From the world's * washing machine came out, industrial washing machines came together. Just like the great changes brought about by the entire industrial revolution, today's increasingly automated washing machines have changed the life of hand-washing.
Common troubleshooting scenarios:
1. What should I do if the washing tub of the industrial washing machine does not turn or the speed is too low?
Solution: The reason is that the tension of the V-belt is not enough, and the belt transmission part is properly adjusted to solve.
2. What should I do if the washing drum of the industrial washing machine is unstable and has abnormal noise?
Solution: The main reason is that the transmission gear is unsuitable or broken. Please adjust the backlash or replace the gear!
3. What should I do if the industrial washing machine has large vibration and loud noise?
Solution: There are three reasons for this: 1 uneven clothing in the two cabins; 2 other items in the washing clothes; 3 the machine is not leveled when installed. For the above reasons, we should adjust in time!
4. Q: What should I do if the outer cylinder of the industrial washing machine leaks?
Solution: Please check whether there are any failures, looseness, aging of sealing rubber in each seal. If there is any phenomenon, please adjust and replace the gasket. If it is caused by excessive water, please drain excess water and lower the water level. If the compression nuts at both ends are loose, please tighten the nuts at both ends to handle them!
The Elevator & Conveyor is used for gentle transit for wide variety of materials, both horizontally and vertically, from one equipment to another equipment.
They are able to handling granule materials, free flowing materials etc, often used in grain industry, food industry and mineral industry etc.
The Elevator & Conveyor we produced is often used in grain industry as accessory equipment for our grain processing equipment.
We have the following types of Elevator & Conveyor:
Dty Bucket Elevator
Slope Elevator
Belt Conveyor
Our DTY Bucket Elevator is vertical type, it has cups to transit granule materials, we have different capacity and height available for different purpose. Capacity 1-30t/h available .
The New Bucket Elevator is Japanese design, similar with Satake brand. It use low damage buckets, with gear motor to reduce grain broken rate, with high strength spring to adjust belt tightness. Currently only 10t/h model is available.
The Slope Elevator is zero damage rate elevator, it use soft and strong belt with flange on side, to prevent grain leak from sides. We have 3-5t/h model available.
The Z type Bucket Elevator is also zero damage rate elevator, it often used in grain, food and chemical industry.
The Belt Conveyor is widely used for bulk grain or transit bags that full of grains. It has different belt width and length available. Capacity can be from 5t/h to 60t/h.
The Auger-type Elevator is used for screw transit on grains like wheat, maize etc. it has inclined angle, which often used for feed bulk grain into equipment or transit between equipments. But it has high broken rate, so not suitable for seed.
Bucket Elevator,Conveyor Machine,Seed Conveyor,Small Bucket Elevator
SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com