After wheat is harvested, how to keep idle wheat combine harvesters is a matter of common concern to the owners. Here, provide some custody knowledge.
1. Open the lid and shield on the combine harvester to thoroughly clean the inside and outside dust, wheat straw, wheat straw and weeds on the machine.
2. Drive into the garage to release oil and cooling water. The new lubricant was dehydrated (heated to 110-150°C until the foam disappeared). Then crank the crankshaft a few times to fill the entire lubrication system. Then use a plastic cloth to wrap the air filter, the vent nozzle, the tank cap, and the fuel tank cap.
3. Put the header on the wheat combine harvester on the pre-prepared wood, lift the axle with the jack, support the cushion, and allow the tire to leave the ground. In order to reduce the inner tire pressure tire pressure, tire pressure should be put to 0.05 MPa.
4, remove all the belt (triangle belt), after technical appraisal, can still be used, to clean, coated with talcum powder, tied to the label, stored in a cool dry place. If you want to hang it on the wall, try not to let the belt roll.
5. Remove the wood bush from the drive chain and the document drafter. After washing the sludge, dig out the sticky oil and put it in the engine oil and soak it in the engine oil for 20-30 minutes. Soak it out for 20-30 minutes. The engine oil that adheres to it is dripped and then wrapped with kraft paper or plastic cloth and stored in a ventilated and dry room.
6. According to the lubrication chart, grease the grease points with a grease gun to lubricate all parts of the wheat harvester.
7. Remove the battery and store it separately. Charge it once a month during storage. After cleaning, clean the electrodes and apply FanTulin.
8. Replace worn and damaged parts. Nothing can be replaced at a time, be marked, and be replaced before the next year's operation.
9, on the paint off the site, do a good job of oil rust treatment.
Quantum Resonance Magnetic Analyzer:
Quantum magnetic resonance analyzer collect the weak magnetic field sensors of frequency and energy from human body through the hand grip sensor. Through the instrument magnifies and the computer processing ,compare with the disease set up inside the instrument install and standard quantum resonance spectrum, use the Fourier analysis method analysis if the sample wave pattern become chaotic.According to the results, make an analytic judgment for the person in state of Sub-health and primal problem, and put forward the standard advice for preventive treatment.
The Quantum Magnetic Resonance Analyzer replaces the need for ultrasonic, nuclear magnetic resonance or radiography for various health related conditions. Holding sensors in your palm simply, health data will be collected within minutes from various body systems. The magnetic resonance analyzer offers new advantages in the field of material analysis. It has been shown that the applicability of such an analyzer exceeds the range of tissue analysis and other medical applications. The magnetic resonance analyzer measures the degree and type of response of a matter under test, and by comparison with reference matter it assists in recognizing deviations from the desired response. The software interface has updated high technology that the operation is more convenient and faster. The main future is 2 languages in software in one machine, both with English and another language.
Quantum Resonance Magnetic Analyzer
Quantum Resonance Magnetic Analyzer,Bio Quantum Analyzer,Quantum Resonance Magnetic Scanner Analyzer,Scanner Analyzer
Shenzhen Guangyang Zhongkang Technology Co., Ltd , https://www.lighttherapymachine.com