The series of plows in the southern paddy field are all suspended ploughs. They are linked to the tractor through the hydraulic suspension mechanism of the tractor. During work, the landing and ploughing of the plough are controlled by the hydraulic suspension mechanism; during transportation, they are hung on the tractor. The commonly used four-plow plough for paddy field consists of plow body, plow frame, suspension frame and suspension shaft.
1. The plow body plough is the main working part that completes plowing. It consists of a plow blade, a plow wall, a plow column, a plow side plate, and a plow rest. The plow shovel and the plow wall constitute the working surface of the plow body, and play the role of cutting soil, turning soil and smashing soil. When plowing, the plow body cuts the soil in both vertical and horizontal directions to form a soil raft. As the plough continues to advance, the soil ridge rises along the surface of the plough; during the lifting process, the soil smashes and twists towards the direction of the plough to complete the ploughing process. .
2. The plow frame is used to install plows, hangers and other components. The plow frame must have sufficient strength and rigidity. Otherwise, it will easily deform during operation and affect the quality of cultivated land. The series of plows used in the South Paddy Fields are trapezoidal or triangular plows. They are welded together with thin-walled steel and can be used to change the width of the plow.
3. Suspensions and suspension axles are the connecting devices for the suspension plough and the tractor suspension mechanism. Domestic wheeled tractors use three-point suspension, so the plow's suspension also has three suspension points. The upper suspension point is connected with the upper pull rod of the tractor, and the two ends of the suspension axis (also called the crankshaft) are made into 180-degree crank pins, which are two lower suspension points respectively connected with the left and right pull-down rods of the tractor. The position of the suspension can be adjusted by adjusting the screw. When the plow is ploughed or ploughed due to traction, it can be adjusted by hanging the shaft.
There are six types of models for the Southern Paddy Field Plow (1LS series). Now we use the commonly used four-plow plough in paddy field as an example to illustrate its use performance: single plow body width 25 cm; suitable for cultivation depth 14-22 cm; supporting 37 or When a 40-horsepower wheeled tractor is used to plough into a paddy field, the rear drive wheel of the tractor must be replaced with a tire with a high tread pattern to prevent sagging and slipping and affect work.
1. The plow body plough is the main working part that completes plowing. It consists of a plow blade, a plow wall, a plow column, a plow side plate, and a plow rest. The plow shovel and the plow wall constitute the working surface of the plow body, and play the role of cutting soil, turning soil and smashing soil. When plowing, the plow body cuts the soil in both vertical and horizontal directions to form a soil raft. As the plough continues to advance, the soil ridge rises along the surface of the plough; during the lifting process, the soil smashes and twists towards the direction of the plough to complete the ploughing process. .
2. The plow frame is used to install plows, hangers and other components. The plow frame must have sufficient strength and rigidity. Otherwise, it will easily deform during operation and affect the quality of cultivated land. The series of plows used in the South Paddy Fields are trapezoidal or triangular plows. They are welded together with thin-walled steel and can be used to change the width of the plow.
3. Suspensions and suspension axles are the connecting devices for the suspension plough and the tractor suspension mechanism. Domestic wheeled tractors use three-point suspension, so the plow's suspension also has three suspension points. The upper suspension point is connected with the upper pull rod of the tractor, and the two ends of the suspension axis (also called the crankshaft) are made into 180-degree crank pins, which are two lower suspension points respectively connected with the left and right pull-down rods of the tractor. The position of the suspension can be adjusted by adjusting the screw. When the plow is ploughed or ploughed due to traction, it can be adjusted by hanging the shaft.
There are six types of models for the Southern Paddy Field Plow (1LS series). Now we use the commonly used four-plow plough in paddy field as an example to illustrate its use performance: single plow body width 25 cm; suitable for cultivation depth 14-22 cm; supporting 37 or When a 40-horsepower wheeled tractor is used to plough into a paddy field, the rear drive wheel of the tractor must be replaced with a tire with a high tread pattern to prevent sagging and slipping and affect work.
Chemical Raw Materials,Pvc Raw Material,Dicyandiamide 99.5%,Cleaning Chemicals Raw Material
Ningxia Darong Chemicals & Metallurgy Co., Ltd. , http://www.darong-cyanamide.com