In recent years, there have been more and more places where domestic turtles have used temperature control facilities to raise turtles. However, the operation of the turtles at the time of stocking is still carried out according to the method of stocking seedlings. There have been many deaths of turtle seedlings after a few days of stocking. phenomenon. Because the price of turtle seedlings is relatively expensive, it has caused farmers no small economic losses. The following is a brief analysis and introduction of the main reasons for the death of turtle seedlings after stocking and the correct method of stocking for reference.
First, the cause of death Due to the different biological forms of turtles and earthworms, their adaptation and requirements for the environment are somewhat different. If Ruan has a skirt that can open and swing in the water, its ability to float in the water is stronger. Therefore, no matter how much the quantity is, when stocking is poured into the water, the seedlings will quickly disperse in the water. And drill into the sand in the bottom of the pond. The turtle seedling has a heavy and hard shield on its back. In addition, when the turtle is disturbed, it will shrink its head, feet and tail to form a spherical shape without buoyancy. Therefore, if they are directly poured into the water like a seedling when they are stocked, they will sink into the bottom of the water together. Because the turtle breathes in the normal growth temperature environment using "pharyngeal" lung respiration, after the turtle seedling sinks into the bottom of the water and cannot immediately rise to the surface to breathe, it will drown and absorb water in the water, resulting in suffocation or edema. forget. As the dead part sinks to the bottom of the water, it will often be ignored if it is not noticed.
Second, stocking methods According to the biological characteristics of turtles, to achieve safe stocking, the following operations should be performed:
1. Prepare for pre-stocking In the same greenhouse water environment, turtles like to be active or inhabited on the water surface. Therefore, in addition to doing the same disinfection and fertilizer water before breeding, they should also lay more cement tiles for their habitat in the pool, when the shop is best in the pool wall 25 cm away from the pool wall, and the middle general Only 1-2 rows are provided. When set, tiles should be placed 2-3 cm below the water surface.
2, stocking stocking is very simple, as long as the turtle seedlings first gently against the water down on the inhabited platform can be, it is best not to fall from the heap, and other people leave the turtle seedlings to adapt to the environment, they will walk away on their own.
First, the cause of death Due to the different biological forms of turtles and earthworms, their adaptation and requirements for the environment are somewhat different. If Ruan has a skirt that can open and swing in the water, its ability to float in the water is stronger. Therefore, no matter how much the quantity is, when stocking is poured into the water, the seedlings will quickly disperse in the water. And drill into the sand in the bottom of the pond. The turtle seedling has a heavy and hard shield on its back. In addition, when the turtle is disturbed, it will shrink its head, feet and tail to form a spherical shape without buoyancy. Therefore, if they are directly poured into the water like a seedling when they are stocked, they will sink into the bottom of the water together. Because the turtle breathes in the normal growth temperature environment using "pharyngeal" lung respiration, after the turtle seedling sinks into the bottom of the water and cannot immediately rise to the surface to breathe, it will drown and absorb water in the water, resulting in suffocation or edema. forget. As the dead part sinks to the bottom of the water, it will often be ignored if it is not noticed.
Second, stocking methods According to the biological characteristics of turtles, to achieve safe stocking, the following operations should be performed:
1. Prepare for pre-stocking In the same greenhouse water environment, turtles like to be active or inhabited on the water surface. Therefore, in addition to doing the same disinfection and fertilizer water before breeding, they should also lay more cement tiles for their habitat in the pool, when the shop is best in the pool wall 25 cm away from the pool wall, and the middle general Only 1-2 rows are provided. When set, tiles should be placed 2-3 cm below the water surface.
2, stocking stocking is very simple, as long as the turtle seedlings first gently against the water down on the inhabited platform can be, it is best not to fall from the heap, and other people leave the turtle seedlings to adapt to the environment, they will walk away on their own.
Waterproof Wound Dressing,Rectangle Big Wound Dressing,Waterproof Adhesive Wound Dressing,Medical Fixation Wound Dressing
Surgimed Medical Supplies Co.,Ltd , http://www.surgimedcn.com