Vacuum-free superconducting radiator technology

High-efficiency and energy-saving - Vacuum-free superconducting radiator Radiator free vacuum superconducting radiator is a new product developed and updated on the basis of traditional radiators. Features: 1. Fast heating, no dust, no pollution, and energy saving. 2. The appearance of novelty: noble and elegant, set functional and decorative in one. 3. Supersonic heat transfer: Radiator is equipped with vacuum-free superconducting liquid, which transfers heat quickly and efficiently. Its quick-effect is 4 times that of copper and 10 times that of carbon steel. It gives the corresponding heat source. The radiator can heat up to about several minutes. 80°C. 4. Waterless operation: Superconducting radiator does not use vacuum, waterless operation, water saving more than 98%, and no traditional plumbing "run", "drop", "leakage" phenomenon, once installed, life-long maintenance-free. 5. High-efficiency and energy-saving: start above 30°C, energy-saving up to 70%, thermal efficiency over 98%, and several times that of ordinary plumbing. The traditional plumbing system heats up very slowly and takes about an hour to heat properly. 6.Safety and environmental protection: It can be used for heat dissipation under the condition that the vacuum film is not tightly sealed and run-flat. It is safe, environment-friendly and flame-retardant, and it meets the fire-fighting standards for large projects. 7. Long service life: normal use for 50 years, life-long maintenance-free. 8. Convenient installation: The structure is simple, and it can be installed and installed without professional personnel (tube connection and no welding). 9. It is an ideal replacement for traditional radiators.

Superconducting Radiator Finished Products


[name] carbon steel superconducting radiator [material] carbon steel [model] 7025
【Series】Plumbing series The superconducting radiator uses carbon steel material. The heating area of ​​one column is one square. When using it, ordinary tap water is used in the pipeline. The heat source can use electric boiler, coal boiler, solar energy, etc., as long as the temperature of the water pipeline exceeds At 30 degrees, the superconducting radiator will reach about the same temperature in two or three minutes. Traditional radiators take 30-50 minutes to reach. In addition, due to the advanced superconducting technology used in this product, a vacuum-free superconducting liquid is added to the radiator, and only the pipeline is filled with water (the water consumption is equivalent to one-twentieth of the traditional radiator). Therefore, only a small amount of coal is used to heat the water in the pipeline, and the radiator automatically heats up. (According to the 100-square-meter room budget, if a superconducting radiator is installed, a 50-square-meter boiler can achieve the effect of a 100-square-meter boiler), and after a winter calculation of three months, the traditional radiator burns about 2 tons of coal. The superconducting radiator only needs about 0.5 tons of coal, which is truly saving coal and saving money.
[name] spcc superconducting radiator [material] spcc
【Model】7063
【Series】Plumbing series The superconducting radiator uses spcc material. Superconducting liquid is added in a strictly sealed state. The heating area of ​​one column is 1.5 square meters. When using it, ordinary tap water is used in the pipeline. The heat source can be electric boiler and coal boiler. Solar energy, etc. As long as the temperature of the water pipeline exceeds 30 degrees, the superconducting radiator will reach approximately the same temperature in two or three minutes. Traditional radiators take 30-50 minutes to reach. In addition, due to the advanced superconducting technology used in this product, a vacuum-free superconducting liquid is added to the radiator, and only the pipeline is filled with water (the water consumption is equivalent to one-twentieth of the traditional radiator). Therefore, only a small amount of coal is used to heat the water in the pipeline, and the radiator automatically heats up. (According to the 100-square-meter room budget, if a superconducting radiator is installed, a 50-square-meter boiler can achieve the effect of a 100-square-meter boiler), and after a winter calculation of three months, the traditional radiator burns about 2 tons of coal. The superconducting radiator only needs about 0.5 tons of coal, which is truly saving coal and saving money.

Name Electric Superconducting Radiator Material Steel Aluminum Composite Model 8080
Series electric heating series The superconducting radiator uses steel-aluminum composite materials, with far-infrared heating tubes as heat source, adopts highly-efficient energy-saving heat transfer technology of superconducting liquid, and evaporates and dissipates heat through superconducting steam in a vacuum state to make heating space The air achieves the best heating effect under the convection of intense heat, and the heating area per column reaches 2 square meters. This technology is an internationally advanced level of environmental protection and energy saving technology. It breaks the traditional heat and water transfer mode with water and oil as the heat transfer carrier. It uses far-infrared electric heating heat pipe for system heat source configuration. It has high electrothermal conversion efficiency and heat dissipation capability. Strong bidirectional energy-saving features, more effective energy-saving products, microcomputer control, more humane, more convenient operation, can adjust the indoor temperature, reach the temperature automatically power off, free to stop at any time, 400 watts -800 watts Each hour consumes 0.2-0.4 kWh, 500 watts-1000 watts consumes 0.25-0.5 kWh per hour, uses time and temperature to service you, is plugged in, safe, efficient, beautiful, and is more than ordinary electric heater Saving more than 50% is the first choice for temporary heating.

Plumbing series uses coal boilers, electric boilers, solar energy and other single-tube links, hot water circulation heating; electric heating series plug-and-play, automatic temperature control, 400 watts -800 watts per hour consumes 0.2-0.4 kWh, 500 watts - 1000 watts per hour consumes 0.25-0.5 kWh.

My unit is for all county and city agencies across the country. We wholesale wholesalers for more than 300 columns and purchase them at wholesale prices. Agency conditions: Each purchase of more than 1,000 columns, no agency fees, according to the agent price purchases, agents subject to regional protection. At the same time, it will transfer technology to the whole country and follow it. Welcome to visit our company!
Jinan Wisdom Star New Technology Research Institute Contact: Cui, Manager Tel: No. 22, Dikou Road, Jinan City

Powder Vinyl Glove 

Powder ,high and light quality powder;Nature (Clear or Transparent) or other colour ;No latex and non sterile;Beaded cuff;Sigle use only;Passed FDA510K ,EN455,EN374,ISO9001,ISO13485 etc.;AQL 1.5,2.50,4.0 ;Medical grade and Industrial grade ,food grade ,electronic grade,SGG ,INTERTEK testing etc.;Soft and comfortable,smooth wearing ;OEM or ODM packing .

Powder Vinyl Glove

Powder Vinyl Glove,Powder Gloves,Disposable Powder Vinyl Glove,Powder Vinyl Hand Gloves

Zibo Hongye Shangqin Medical Science and Technology Co.,Ltd. , https://www.vinylgloves.cn

Posted on