What should you pay attention to when using a new agricultural machine?

1. After buying a new camera, before using the engine, you must first carefully read the instruction manual of the machine. Pay special attention to the basic requirements of the book:
(1) Use fuel of the specified grade, fully precipitate and filter before use, and the oiler should be kept clean.
(2) The lubricating oil should be kept clean, and the amount added must be sufficient, and it should be replaced regularly. The use of the grade should be consistent with the regulations.
(3) The air cleaner should always pay attention to maintenance.
(4) Care should be taken to add cooling water, especially if the engine is not to be operated in a water shortage.
(5) Always pay attention to check and tighten the relevant bolts and nuts, especially the connecting rod bolts, the bolts on the drive shaft and the lock nuts on the flywheel, and the fastening nuts on the wheels.
If the user buys a new camera and really does it in accordance with the above basic requirements, then the life of the camera can be greatly extended.
2. After buying a new machine, do not carry the load operation immediately. It should be run-in according to the instructions. After the running-in is completed, the machine oil filter is cleaned and residual impurities in the engine oil are removed. If necessary, the engine oil must be replaced and the oil pan cleaned.
3, when the new machine carries on the work, should carry on strictly according to the request of the manufacturer's instructions, does not overload, does not surpass the speed, does not surpass the feed, does not have the long-term overload work.
4, can not be free to modify the new machine and any increase engine speed. In order to make the machine run faster, some users may arbitrarily adjust the fuel supply and pressure of the high-pressure oil pump, and some of them tie the governor spring wire. This is even more wrong.

[Composition]

The main component of this preparation is human immunoglobulin, which is prepared by cold ethanol fractionation of human plasma from healthy donors. The manufacturing process contains a step to remove anticomplementary activity and a dual viral inactivation process. It contains a suitable amount of glucose or maltose as stabilizer (see table below), but does not contain any antiseptic or antibiotic. The distribution of IgG subclasses is close to the serum level of normal subjects and maintains the bioactivity of Fc fragment of IgG.

[Indications]

1. Primary agammaglobulinemia, such as X-linked hypogammaglobulinemia, common variant immunodeficiency diseases, immunoglobulin G subclass deficiency, etc.

2. Secondary immunoglobulin deficiency diseases, such as severe infection, septicemia of newborn, etc

3. Autoimmune diseases, such as primary thrombocytopenic purpura, Kawasaki disease

Intravenous Injection Of Human Immunoglobulin

Intravenous Injection Of Human Immunoglobulin,Intravenous Immunoglobulin,High-Quality Effective Intravenous Immunoglobulin,Human Immunoglobulin For Intravenous Injection

Sichuan Yuanda Shuyang Pharmaceutical Co., Ltd. , http://www.syimmunoglobulin.com

Posted on